Sunco Machinery Wood Chip drying system is ideal for drying wood chip, sawdust and wood shaving can help to dry and reduce the moisture content of wood chips to be about 15% or as need in one time drying directly.
Wood chip drying system consists of :
Heat Supplying System ---- Material Feeding System --- Drying System --- Dried Material Discharging System --- Water Vapor Exhaust System --- Waste Flue Gas Processing System.
The people put the fuel (waste wood) into hot air furnace and light the fuel. Hot Air Furnace generate the dry hot air, and the high pressure draft fan makes the dry hot air into the 
drum. The dry hot air not only heat the wet wood chip, but also heat the dryer drum. Under the function of the lifting plate and special drum inner structure, the wet wood chip moves up and down to the discharging end of the dryer drum, during this process, the wet wood chip not only absorb the heat of the dryer drum, but also have strong heat exchange with the dry hot air. During this process, the humidity inside the wet wood chip is heated and evaporated into water vapor, and the dry wood chips come out from the outlet of wood chip drying machine.
Under the function of the induced draft fan, firstly the exhaust air with water vapor goes into cyclone separator, and then the cyclone separator separates the dust from the exhaust air and water vapor. The exhaust air and water vapor come out from the top of the cyclone separator, and then pass through the draft fan, then goes into chimney, and finally goes into atmosphere. The dust come out from the outlet feeder which is installed on the bottom of the cyclone separator.
Finally the dry wood chip leaves the wood chip drying machine, and to be taken into product storage area by output belt conveyor.
